What This Error Means
Wired remote controller - indoor unit communication error
Safe Check Steps
The following steps are for general guidance only. Do not touch electrical panels, gas lines, outdoor units, compressors, or electronic boards. Call authorized technical service for any repair.
- 1Completely power off the unit at the plug, wait 5 minutes, then turn it back on.
- 2Check or replace the remote control batteries.
- 3Ensure the remote is pointed directly at the indoor unit with no obstructions between them.
When to Call Service
If the problem persists after trying the safe check steps, contact authorized technical service.
Call Authorized ServiceFrequently Asked Questions
Fujitsu E:09 kumanda iletişim hatası nedir?
E:09, kablolu uzaktan kumanda ile iç ünite arasındaki haberleşmenin kesildiğini gösterir. Kablo hasarı ya da kumanda kartı arızası en sık nedenlerdir.
E:09 hatası kablosuz kumandada da çıkar mı?
Hayır. E:09 yalnızca kablolu (wired) kumanda kullanan modellerde görülür. Kablosuz kumanda kullanan sistemlerde bu hata kodu oluşmaz.